![]() |
||||||||||||||||||
|
Navigation
Main Site Articles Projects How-To's CD's Chopper Builders Magazine Downloads
Discussion Board
General Information
Legal Information
|
Welcome To The Chopper Builders Handbook Online The primary objective of the Chopper Builders handbook is to provide basic information that will enable everyone to successfully build their own Chopper from scratch.
Update June 10, 2012 We've moved the whole CBH operations to the little town of Murphy just outside of Dallas Texas.
This snapshot is one of our neighbors taken from the back door of the shop. We've rented a very small shop but will be doing full-service custom work again and have signed on as a dealer for Paughco products. We decided to go with Paughco since we've been using their parts for over 30 years and most of their inventory is still made in the USA which is remarkable in today's economy. If you're in the market for anything in the catalog drop us a line as we will make you some great deals.
If you live in this area stop by and see us. We're located at 231 W. FM 544, Unit A110 in Murphy, Texas. We're looking a for a good Tig man to work on our Frames and Springers.
Update Nov. 20, 2011 As many people are aware the old original Chopper Builders Handbook site suffered what we initially thought was a catastrophic hardware and software failure in early 2011. This 'crash' destroyed not only the primary data on the main server and raid disks but also all of the data on our backup server. We took the drives to a service shop in an attempt to recover the files and found that the 'crash' was most likely a deliberate hack of the site that somehow went very badly. The only data that was actually destroyed beyond repair were the image files. A good portion of the html text files were still readable but moved into some strange directories apparently in some attempt to download the entire site to a remote server. Unfortunately a lot of the most recent files that we added to the site were simply to scrambled to bother recovering. As a result of this situation we're presently in the process of rebuilding the site from the ground up but that will take a considerable effort and most likely be a long and drawn out process. We ask all of our visitors to be patient with us as we start down this road. In addition I'd like to thank all of the visitors who have supported this site through thick and thin over the past eight years and especially thank those of you have taken the time to help us in this rebuilding process. I think that in the long run we have a much better and more helpful site than the original version. We're trying our best to get the site back up and running again so please be patient during this transition.
Upcoming Articles: Easy Sportster Hardtail fabrication Dropped Springer Rockers Harman Style Spirder Build
|
|||||||||||||||||
| Main Page | Copyrights | Terms of Use | Warranty Disclaimer | Security and Privacy | Contact | Copyright © 2003-11, All Rights Reserved
|
||||||||||||||||||